***********************************
              PLANET IG-100 UPGRADE Instruction
             ***********************************

Release v1.3

*** File contains:
Upgrade.txt	This instruction file.
Download.exe	Download program for IG-100/200
Longname.zip    Firmware v50B3 for long POP3 login name and password

CU5151.ZIP	Firmware v5151 for IG-100
NT95UPG.exe	Upgrade program Windows 95/ NT .

*** Before upgrading
To upgrade your current version, do the following:

1, Plece your IG-100 on the same network segment as the PC that will be used to download
  the new firmware.

*** For Windows 95/98 and Windows NT (Recommended!)

2. Please download the updated firmware and the upgrade program "NT95UPG.EXE"
3. Execute the NT95UPG to install the utility "Ugutil"
4. Follow the README file of Ugutil for the upgrade procedure


*** For DOS Environment
2, The download procedure must be done in PURE DOS mode, and must be used the
   Packet Driver from your original Network card installation disk.
   ( Normally is in your A:\PktDrv directory )
   ( There are three network card interfaces: FTP -> Packet Driver 
                                   Microsoft -> NDIS Driver
                                   Novell  -> ODI Driver  )

3, Remember you must load LAN card's Packet Driver only 

4, Here is an example:

(1)  Load
NE2000  0x60  5  0x300   (NE2000 is for Packet Driver,  0x60 is a software interrupt)
                          5 is a hardware interrupt,     0x300 is a hardware I/O  )

(2)  Load
DOWNLOAD program

(3)  Select File -> xxxx.bin
 When prompted Download This, select YES.

(4)  Press [ESC] until you return to the download management screen.

(5)  Select Target -> Your Device ( SCXXXXXX). When given the Available Option menu,    
 select Download This Target.



*** Note: DO NOT POWER OFF the device until the upgrade process has been completed. Your
          old firmware has been erased and doing so will render the device useless.

*** Note: If you receive an error message stating Hardware Type Mismatch !, Your device's 
          internal board and the new firmware version are incompatible. Consult the PLANET
          Technical Support.

If you still have any questions, please contact the following 
E-Mail address:

  Support@planet.com.tw

Sincerly

PLANET Technical Support