PLANET IH-400 V2.0 Upgrade Procedure & Notice

[Release Notes] [Before Upgrade] [Upgrade Procedure]

Before Upgrade

Please make sure the EPROM of the IH-400 is version 1.1!
Incorrect firmware upgrade may cause IH-400 malfunction!!
Make Sure your PC can connect to the IH-400 with current LOGIN program.
Disconnect and Un-plug all the connection except the PC which is going to upgrade the IH-400.


Upgrade Procedure

Please follow the following steps for the upgrde procedure.
  1. Download the file D2V20.ZIP and decompressed it into your local HDD.
  2. The two files are:
  3. Execute the file Download.exe in your Windodws PC
  4. Click on Tools from the menu bar
  5. Choose [Get Firmware Version] to double check the firmware version.
  6. Choose [Download Firmware] and choose the firmware file DLOAD20.BIN
  7. Click on Download to process the firmware upgrade. Please do not power off the IH-400 during the procedure.
  8. After the procedure, close the Download program and re-boot the IH-400.
  9. Download the file LOGIN.ZIP, decompress it to the IH-400 Login program directory and replace it
Now the IH-400 is upgrade to version 2.0 successfully!

Release Note

IH-400 version 2.0 updated features and modification
  1. The Gateway Address in TCP/IP Configuration must be set as 172.16.1.254. This change provides both Intranet and Internet functionality. Please leave the original address in the user's manual.
  2. Login program provides "Save Password" function for you to save a password.
  3. More on-screen messages are provided including: Password fail, Modem disconnected...etc.
  4. A modem configuration terminal box for AT command configuration has been added.
  5. Difficulties connecting to DNS servers has been eliminated.
  6. FTP access performance has been increased by 100%.
  7. Auto time-out setting has been added for Internet disconnection.


PLANET Technical Support
Support@planet.com.tw