******************************************************
              Example for PLANET RT-101 LAN to Internet IP Routing
             ******************************************************
This example file is only for reference, the parameter of it may different
with your LAN/WAN and modem configuration.

Lease Line Host Account Configuration

Modem		: ZyXEL U1496plus 19200
IP Range from ISP: 203.70.249.0 ~ 255
Subnet mask	: 255.255.255.0
Broadcast address: 203.70.249.255
Local Router IP	: 203.70.249.1
Serial port IP in ISP: 139.175.50.50
Serial port IP in your side : 139.175.248.39
DNS in ISP	: 140.92.1.50
DNS local	: 203.70.249.6

Configuration in RT-101

	[ Basic configuration ] 	Version 1.0
    Local IP address: 203.70.249.1
    Local network mask: 255.255.255.0
    Remote IP address: 139.175.50.50
    Remote network mask: 255.255.255.0
    IP broadcast address: 203.70.249.255
    User ID: GUEST
    Password:
    Line type: Leased line (Null modem)
    Baud rate:  38400 bps
   >Phone number: 3758300
    Disconnect link if inactive for more than 0  minutes.
    Modem AT commands:
       Initial string: AT&F
       Answer on string: ATS0=1
       Answer off string: ATS0=0
       Hang-Up string: ~~~+++~~~ATH0
       Dial prefix string: ATDT
    [Advanced settings]
    Save and reset device
--------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select

[ Advanced settings ]

   Serial Port:
     >UDP checksum: Yes
      Periodic RIP: Yes
      Generate zero fill (BSD 4.2) broadcast IP address: No
      Use ethernet IP address and network mask: No
         IP address: 139.175.248.39
         Network mask: 255.255.255.0
   Local MTU: 1500
   Remote MTU: 1500
   PPP Link:
      Connect-tries: 3  Tries
      Delay between two tries: 1  Minutes
   [Change console password]

--------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select