Workstation for DOS ODI Client

   Introduction:
   -------------
   This document describes the procedure to setup the NetWare V3.x,V4.x,V5.x
   workstation driver for ENW-9601SX 1000Mbps Ethernet Adapter.

   Location of Driver:     \NETWARE\DOSODI\tc902x.COM

   Sample Configuration Files:
   ---------------------------
     STARTNET.BAT:

         LSL
         TC902X
         IPXODI
         NETX or VLM (VLM's for NetWare 4.x )

   Setup Procedures for NetWare 3.11/3.12 Client :
   -----------------------------------------------
      Before you start with the installation process, make sure that
      the  adapter is properly installed and configured. Make sure
      that your NetWare workstation is properly installed.

      1. Copy tc902x.COM from the Driver Diskette subdirectory
         A:\NETWARE\DOSODI to your harddisk.

      2. Create a batch file, or add to your STARTNET.BAT file the commands
         listed above under STARTNET.BAT

      3. Edit the NET.CFG file that you copied over. Edit the file per your
         requirements (see examples above).  If there are two frame types
         listed, whichever frame type is listed first, that is the one that
         the  driver will load.  See above for examples.  The NET.CFG file
         should be in the same directory with the LSL.COM file.