Windows 2000

   Introduction:
   -------------
   This document describes the procedure to install Windows 2000 driver for
   ENW-9601SX 1000Mbps Ethernet Adapter.


   Installing driver procedure on Microsoft Windows 2000 :
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot.
      Executing Windows 2000, it will auto-detect your system configuration
      and find the adapter hardware.  

      1. Boot the computer.

      2. After the boot process, a window will ask you to select which 
         driver you want to install, select "Driver from disk provided by
         hardware manufacturer".

      3. Insert the Tamarack TC902x driver disk into drive A and specify
         the setup file pathname A:\WIN2000 

      4. Windows 2000 will appear some messages to insert Windows 2000
         system disk to complete setup step.

      5. Windows 2000 will finish the other installation procedure 
         automatically,then you restart the system.