Windows NT 4.0

   Introduction:
   -------------
   This document describes the procedure to install  Windows NT V4.0
   driver for ENW-9601SX 1000Mbps Ethernet Adapter.
   
   Installing driver procedure on Microsoft Windows NT :
   -----------------------------------------------------
   1. Restart the computer. Boot Windows NT 4.0.

   2. Login as administrator.

   3. In the Main group of NT, select the "Control Panel" icon.

   4. In the Control Panel window, choose the "Network" icon.

   5. In the Network Settings dialog box, choose the "Add Adapter" button.
      The Add Network Adapter dialog box appears.

   6. In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter> button.

   7. Insert the driver disk in drive A, enter drive and pathname
      A:\WINNT4  which is the path  where the setup file OEMSETUP.INF
      is located, and then choose the OK button.

   8. The screen will appear "ENW-9601SX 1000Mbps Ethernet Adapter"
      highlighted. Click "OK."

   9. Then a window will appear entitled "TC902x Based 10/100/1000
      Ethernet Adapter" This window allows you to choose default settings
      for the adapter. You can leave the settings as they are and choose
      "OK."

  10. Windows NT will then perform the binding process.If any additional
      network software options were installed,you may be prompted for
      specific information for these packages.

  11. Restarting your system you will acquire network service.