==============================================================

	      PLANET ENW-9602T Gigabit Ethernet Adapter
	     Driver Installation For SCO UnixWare 7.1.0

 ==============================================================

             Copyright (C) 2001 PLANET Technology Grop.
			All rights reserved.



Overview:
=========

This file explains how to install and configure the MDI driver. 


Installation and Configuration
==============================

	Manual Installation of the driver 
	---------------------------------

	a) Transfer dp.pkg onto a floppy disk

	b) Poweroff your system and install the card in a PCI
	Bus Mastering slot.

	c) Power on the system.

	d) Mount floppy drive 

		# mount -F dosfs /dev/fd0 /mnt

	e) Copy DSP (Driver Software Package) files to

		/home/nsc/dp

		# mkdir -p /home/nsc/dp
		# cd /home/nsc/dp
		# cp /mnt/dp.pkg .

	f) Unmount floppy

		# umount /mnt

	h) To install, use command pkgadd and follow instructions

		# pkgadd -d /home/nsc/dp/dp.pkg
		

	Configuring the Driver :
	-----------------------

	a) After installation of the driver, run "netcfg" and add the 
	desired Menu options. Select,

	Hardware -> Add new LAN Adapter -> National Semiconductor's Gigabit
	Ethernet Adapter DP83820

	b) Choose the appropriate protocol (SCO TCP/IP) .

	c) Fill in TCP/IP Configuration parameters like IP Address,
	NetMask, Domain Name etc..

	d) System reboot is not required.