============================================================== PLANET ENW-9602T Gigabit Ethernet Adapter Driver Installation For Windows NT 4.0 ============================================================== Copyright (C) 2001 PLANET Technology Grop. All rights reserved. Content: -------- Installing the PLANET ENW-9602T Gigabit Ethernet Adapter on Windows NT 4.0: 1. Power off your PC and install the network card. 2. Turn power on then boot from Windows NT 4.0. 3. Click the "Start" command button, select the "Settings" icon to display an option list under it. 3. Click the "Control Panel" icon. 4. Double-click the "Network" icon. 5. Select the "Adapters" item, then click the "Add..." button in the "Network" dialog box. 6. Click the "Have Disk..." button in the "Select Network Adapter" dialog box. 7. Insert the Driver Diskette in your floppy drive. Enter the full pathname A:\ of the driver installation information file (OEMSETNT.INF) in the "Insert Disk" dialog box, then click the OK button. 8. Select "PLANET ENW-9602T Gigabit Ethernet Adapter", then click the OK button in the "Select OEM Option" dialog box. 9. And then PLANET ENW-9602T Gigabit Ethernet Adapter Setup dialog box appear, you must specify "Media Type" of the adapter plugged in your PC. Because netcard detection function does not support in SETUP program, please make sure these settings match your adapter's configuration. Otherwise the network ability of Windows NT can not work properly. The connection types for Giga3264 Adapter is ----------------------------------------------------------------------- Auto Negotiation ; performs automatic media detection during ; driver initialization. 10BaseT Half_Duplex ; RJ-45 connector, line speed is 10 Mega ; bits per second. 10BaseT Full_Duplex ; communication in full duplex mode, speed ; is 20Mbps. 100BaseTx Half_Duplex ; RJ-45 connector, line speed is 100 Mega ; bits per second. 100BaseTx Full_Duplex ; communication in full duplex mode, speed ; is 200Mbps. 1000BaseTx Half_Duplex ; RJ-45 connector, line speed is 1000 Mega ; bits per second. 1000BaseTx Full_Duplex ; communication in full duplex mode, speed ; is 2000Mbps. ---------------------------------------------------------------------- 10. To complete network installation, remember to bind the adapter to the transport drivers by choosing the "Bindings" button from the "Network" dialog box. 11. Click the "Close" button in the "Network" dialog box. 12. Remove the Driver Diskette from your floppy drive. 13. Restart your computer to initialize the network function.